Basic Facts to Know About Paint Scratch Repair  

Scratches are one of the ugliest damage that can happen to a car, and that too without any fault of yours. Not only does it brings down the delightful appearance of the car to a faulty one, but it can also keep spreading the damage to a larger area, if not treated immediately.

So, here is a brief note on all those basic facts of paint scratch repair, the knowledge of which will help any car owner from the time he or she acquires it. We have learned these facts directly from the experts in this field, who serve at the Liberty Lake paint scratch repair center.

Smoothening the Surface

When your car paint gets scratched up, the damage can sometimes go beyond the coats of the paint and reach the car body surface as well. As a result, the affected area loses its smoothness, which needs to be healed first before going into the paint scratch repair job. The work of smoothening the affected surface area is that of sandpaper. Rubbing the scratched surface gently with the sandpaper will even the surface and make it ready for applying the primer at the first level, and then the paint.

Knowing the Factory Paint Code

It is evident that once your car paint is scratched, it will need a patch paint job in and around the affected area. For this, the paint shade to be used must be of the same paint code, shared by the manufacturer of the car. To know the code, you need to refer to the owner’s manual or consult an expert of your car brand dealership, through their website, or in person.

Once you can obtain the factory paint code of your car paint shade, the next step lies in getting the paint shade from a reliable shop. Here, you must be strict enough not to buy any alternative, even if it looks apparently the same. the quality of the paint will determine how smooth the scratch paint repair session will go, and how long you can enjoy its effect. So, do not try to save a few pennies and get into the loop of spending more in the near future.

The Repair Procedure

In case of minor scratches, we don’t need to go through the clear coat and can go straight into the color. Areas of low gloss or when you can see the orange-peel texture can often be simply polished with a compound material. But even then, you need to clean the panel first thoroughly and after you’re done you need to remove the abrasive compound.

Art of Priming and Coating

As explained to us by the experts of the center of paint scratch repair near Liberty Lake, to repair a major paint scratch, it is required to spend a couple of minutes applying the primer and then wait for around ten minutes to let it dry. Then again spend another two minutes painting the patch, where the original paint has started peeling off. In this entire process, one needs to remember that the Primer is used to give way to apply the base coat, and each of its applications will seal in the pigmentation and add protective layers to the surface area that got damaged.